Rivet Gage


Rivet Gage measures the flushness of welds , rivets and screw heads . Measure the height (or depth) of rivet and screw heads and the flushness of welds; direct to .0005″… instantly and with great accuracy. Easily maintain Mil Spec riveting standards of + .005″/-.000″ for flushness. Use whenever flushness, smoothness, and non-interference must be controlled.


ISO-17025 Certification

model 1300 rivet gage graduations .001″
model 1350 rivet gage graduations .0005″
model 1300-SPC electronic rivet gage graduations:.0001″/.005 mm
model 1300-M rivet gage metric graduations .01 mm

known applications include:

  • Rivet and screw heads, arc welds in aircraft, missile, aerospace, electronic and sheet metal work Set-up and in-process control of rivet head shaving machines Control staking and rivet height in office machines and other complex mechanisms to prevent shearing and interference Measure the timing, movement, and pressure correlation of valves, hydraulic valve spools, hydraulic cylinders Use on embossed, stamped, coined, upset, dimpled, and staked parts
  • Provides an independent, unbiased, easily-verified flushness measurement… direct in .001″ or .0005″ increments.
  • Optional Digital Electronic with SPC
  • Includes:
    • Instructions
    • Fitted, foam-lined storage case.

The gage’s three-legged base sits solidly on any surface, flat or curved. On curved surfaces, zero is set at a point immediately next to the point to be measured. The contact tip is then slid onto the fastener or weld… thus the effects of curvature are neutralized. Comes complete with instructions in a fitted, foam-lined storage case..


  help desk software