Barcor Hole Gage

Hole gage to measure small diameters.The HOLE GAGE is a direct reading gage. No Setting Master (Standard) or look-up chart is required. To check the setting, press the base of the gage against any flat ground surface and adjust the dial to read the “Set To number stamped on the back.

FILL IN QUICK QUOTE FORM BELOW FOR PRICING OR EMAIL: SALES@WILLRICH.COM

 

Hole Gage to measure small holes Features:

  • 22 Models (11 English/11 Metric) cover a range capacity from .010″ (.25mm) to 1.030″ (26.20mm). Individual gages, except for Model 040, have .100″ capacity. Model 040 has .030″ capacity.
  • AGD Group-2 Dial Indicator with easy to read 2-1/4″ Dia. dial.
  • Yellow-for-Metric dial faces to prevent accidental misuse.
  • All gages furnished with foam lined Storage Case and complete operating instructions.
  • Optional NBS Certification available.
  • Smallest diameter available is .004″ (.10mm) on specials.
  • Optional Setting Masters available for greater accuracy.
  • Available individually or in convenient sets.
  • Super Hole Gage available with .0001″ or .001mm resolution.
  • Electronic Hole Gage with .0001″/.005mm and SPC, also available.
  • GUARANTEED ACCURACY:  ± .00025″

INCH MODELS .001″ GRAD.
Optional SETTING MASTERS
Model   Capacity   Part No.
040      .010″- .040″ SM- 040 or SM- 040M
130     .030″- .130″ SM- 130 or SM- 130M
230     .130″- .230″ SM- 230 or SM- 230M
330     .230″- .330″ SM- 330 or SM- 330M
430     .330″- .430″ SM- 430 or SM- 430M
530     .430″- .530″ SM- 530 or SM- 530M
630     .530″- .630″ SM- 630 or SM- 630M
730     .630″- .730″ SM- 730 or SM- 730M
830     .730″- .830″ SM- 830 or SM- 830M
930     .830″- .930″ SM- 930 or SM- 930M
1030  .930″- 1.030″ SM- 1030 or SM- 1030M

METRIC MODELS .02mm GRAD.
Model Capacity
040M .25- 1.00mm
130M .75- 3.30mm
230M 3.30- 5.85mm
330M 5.85- 8.35mm
430M 8.35- 10.90mm
530M 10.90- 13.50mm
630M 13.50- 16.00mm
730M 16.00- 18.55mm
830M 18.55- 21.00mm
930M 21.00- 23.60mm
1030M 23.60- 26.15mm


  help desk software