ElektroPhysik MiktroTest Coating Thickness Gauge

$380.00$625.00

MikroTest Two versions: non-magnetic materials over steel & ZnFe – For measuring electrolytic & Hot Dip Galvanized over steel.

Clear

ElektroPhysik MiktroTest Coating Thickness Gauge Features:

  • No calibration necessary Simple set-up and measurement
  • All gauges are without power or battery
  • One point measurement
  • Measurement at any angle
  • Fully automatic
  • Robust metal case to protect from mechanical shocks
  • Precision measuring system resistant to solvents

MikroTest® gauge with hand strap:

  • Plastic carrying case
  • Operating instructions

Available Options

measuring-range Product Number
manual-gm-0-4mils DF-1000
auto-gm-0-4mils DF-1002
manual-fm-0-40mils DF-10100
auto-fm-0-40mils DF-1012
auto-s3m-8-120mils DF-1022
auto-s5m-20-200mils DF-1032
auto-s20m-0-3-0-8 DF-1050
auto-g-0-100-micrometers DF-1001
auto-g-0-100-micrometers DF-1003
manual-f-0-1000-micrometers DF-1011
auto-f-0-1000-micrometers DF-1013
auto-s3-0-2-3mm DF-1023
auto-s5-0-5-5mm DF-1033
auto-s10-2-5-10mm DF-1043
auto-znfe-0-2-2oz-ft2 DF-1004

ElektroPhysik MiktroTest Coating Thickness Gauge Technical Specifications:

All coatings on steel e.g. paints, powder coating,enamels,chrome, zinc…measure at any angle. No power supply required.

  • electroplating
  • nickel coatings
  • phosphating
  • paint
  • plastic
  • enamel etc. on steel
  • Conforms to ASTM D7091

Measuring principle:
The measurement of the coating thickness is based on magnetic attraction. The attractive force is related to the distance between a permanent magnet and a steel substrate. This distance represents the thickness of the coating to be measured. The magnet is lifted from the surface by means of a spring connected to the magnet arm. The force needed to lift the magnet is directly related to the angle of rotation of the torsion spring. This measuring principle is also especially suited for electroplated nickel on copper, aluminium and other non-ferrous metals.


  help desk software