Glastonbury Gage Vernier Caliper Masters, 1″ to 6″ (25-100mm)

$482.79

GSG Vernier masters are used to calibrate and set Vernier calipers. The master is superior to gage block calibration because they do require block stacks and therefore it is much faster to the inspect linear range of the tool. In addition they indicate wear on the caliper anvils because both the ID and OD jaws are inspected without additional setup.

  • 1.00-6.00 diameter in 1.00 increments for outside jaws, 1/2 to 4 1/2 inside jaws. +/-.0002
  • 25-150mm diameter in 25.0mm increments for outside jaws, 12.5 to 112mm for inside jaws +/-.005mm

Larger sizes are available upon request.

Clear

Options

Glastonbury Gage Vernier Caliper Specifications:

  • 1.00″-6.00″ diameter in 1.00″ increments for outside jaws, 1/2″ to 4-1/2″ inside jaws. +/-.0002
  • 25-150mm diameter in 25.0mm increments for outside jaws, 12.5 to 112mm for inside jaws +/-.005mm
  • Case hardened, stabilized, ground and lapped to +/-.0002.

Available Options

inch-or-metric Product Number
Inch (1" - 6") VC-1E
Metric (25 - 100mm) VC-1M

Download the Glastonbury Gage Vernier Caliper product literature using the link below:

Glastonbury Southern Gage Vernier Caliper Master


  help desk software