Dimensions: 140 mm x 76 mm x 25 mm / 5.5″ x 3″ x 1″
Measuring Ranges: Ra 0.03 μm to 6,35 μm / 1 μin to 250 μin
Ry 0,2 μm to 25,3 μm / 8 μin to 999 μin
Rmax0,2 μm to 25,3 μm / 8 μin to 999 μin
Rz 0,2 μm to 25,3 μm / 8 μin to 999 μin
Mahr Federal Pocketsurf III (EMD-1500-311)
$2,379.55
Mahr Federal Pocketsurf III
Read More
Mahr Federal Pocketsurf III Features:
- Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.
- Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.
- Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.
- Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in.
- Operates in any position – horizontal, vertical, and upside down
- Easy-to-read LCD readout presents the measured roughness value, in microinches or micrometers, within half a second after the surface is traversed.
- Out-of-range (high or low) and “battery low“ signals are also displayed.
- Four switchable probe positions – axial (folded) or at 90°, 180° or 270°
- Even difficult-to-reach surfaces such as inside and outside diameters are accessible.
- Integrated data output for SPC-processing units that is compatible with the most common data processing systems.
