Mueller Gage 1400 Pitch Diameter Gage for Gears, Splines, Spherical and Groove Diameter
Measure Pitch Diameters of Gears, Concentricity of Internal Gear PD and OD, Concentricity of External Gear PD and ID, Measure shallow bores, measure pitch diameters of gears, measure counter bores and more
ORDERING INFORMATION
#1400 Gage consists of gage body with AGD Group 1 .0005″ dial indicator with rev counter. .0001″ and metric dial indicators available. Measuring tips ordered separately.
#1400 Measuring tips are supplied in a set of 2. Please specify the diameter you require to the nearest .0001″.
#1400-35 gage includes #1400 gage body with .0005″ dial indicator & 1 set #1400 carbide ball measuring tips. .0001″ & metric indicators available.
Read More
FOR GEARS, SPLINES, ALSO SPHERICAL AND GROOVE DIAMETERS
Adjustable Gage with interchangeable measuring tips will check the following:
Pitch diameter of splines and gears with even or uneven number of teeth, internal and external.
Concentricity of internal gears-pitch diameter to OD.
Concentricity of external gears-pitch diameter to ID.
Spherical diameters of ball races, internal and external.
Groove diameters, internal and external when used with our #1900 series measuring tips.
Carbide contact balls are available from .050″ to .505″ diameter in .0001 ” increments. Smaller and larger sizes available on special order at additional cost.
Standard inreach of #1400 tips is 1 1/4″.
Special 3 3/4″ inreach tips available. Supplied with .0005″ dial indicator only.
Approximate weight of complete gage with tips is 22 oz.
Range slide easily reversed for checking OD’s.
GAGE RANGE (INSIDE DIAMETER)
Please specify exact diameter required to nearest .0001″
Carbide Ball Diameter From To
.050″-.156″ Ball .750″ 6.775″
.156″-.250″ Ball .812″ 6.875″
.250″-.300″ Ball .937″ 6.975″
.300″-.350″ Ball 1.000″ 7.075″
.350″-.400″ Ball 1.125″ 7.175″
.400″-.450″ Ball 1.250″ 7.275″
.450″-.505″ Ball 1.312″ 7.375″
GAGE RANGE (OUTSIDE DIAMETER)
Please specify exact diameter required to nearest .0001″
Carbide Ball Diameter From To
.050″-.156″ Ball 0 4.650″
.156″-.250″ Ball 0 4.500″
.250″-.300″ Ball 0 4.400″
.300″-.350″ Ball 0 4.300″
.350″-.400″ Ball 0 4.200″
.400″-.450″ Ball 0 4.100″
.450″-.505″ Ball 0 4.000″
