Phase II PHT-1800 Portable Hardness Tester Technical Specifications:
- Accuracy: +/- 0.5% (referred to L=800,
- Repeatability accuracy: +/- 4L units) L=Leeb
- Measuring range: 200-960 HL
- Materials: steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.
- Battery type: AA alkaline (4)
- Operating temperature: 5-104 degrees F
- Dimensions: 150 x 74 x 32mm
- Weight: 245 grams
Operation:
- Load the impact body
- Place the impact body on your test piece
- Push the button to begin testing and obtain reading
Special Application Impact Devices:
Impact Device D
Universal standard device:
Use for the majority of hardness testing assignments
Impact Device DL (not shown)
Needle front section .109 diameter x 1.96 length
Measurements in extremely confined spaces
Impact Device G
Enlarged test tip: For use on solid heavy components such as; rough castings and forgings. Brinell only.
Impact Device DC
Extremely short impact device
Used for very confined spaces such as holes, cylinders, internal measurements
Impact Device D+15
Slim front section with coil set back.
Hardness measurements in grooves, recessed surface.
Impact Device C
Reduced impact energy
For testing case hardened or thin walled components
Impact Device Specifications for PHT-1800:
Impact Device D Universal standard device:
Use for the majority of hardness testing assignments
Impact Device DL (not shown)
Needle front section .109 diameter x 1.96 length Measurements in extremely confined spaces
Impact Device G Enlarged test tip: For use on solid heavy components such as; rough castings and forgings. Brinell only.
Impact Device DC Extremely short impact device
Used for very confined spaces such as holes, cylinders, internal measurements
Impact Device D+15 Slim front section with coil set back.
Hardness measurements in grooves, recessed surface.
Impact Device C Reduced impact energy
For testing case hardened or thin walled components