Shimpo DT-311A Stroboscope

Shimpo DT-311A Stroboscope

$540.49 – $559.49

Shimpo DT-311A Stroboscope

Clear

Shimpo DT-311A  Stroboscope Features:

  • Extruded aluminum construction
  • Highly accurate (± 0.01% of reading)
  • Phase shift (in degrees of delay time)
  • High flash rate (up to 35,000 FPM)
  • Microprocessor-controlled
  • External trigger
  • Synchronous output
  • Flash timer control
  • Continuous duty cycle
  • Highly polished focused reflector
  • Manual flash controller knob

Available Options

vac Product Number
120 VAC #DT311A
220 VAC #DT311A230V

Shimpo DT-311A  Stroboscope:

  • Internal Mode
  • Flashing Range 40.0 – 35,000 FPM (flashes per minute)
  • Accuracy ±0.01 % of reading
  • Resolution 0.1 FPM : 40.0 – 5,000 FPM
  • 0.2 FPM : 5,000 – 8,000 FPM
  • 0.5 FPM : 8,000 – 10,000 FPM
  • 1 FPM : 10,000 – 35,000 FPM
  • Phase Shift Use +/- push buttons (360° in 6 seconds)
  • Display Update Time 0.2 seconds approx.
  • Output Signal Synchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude(approx.), 4.7 KΩ impedance
  • Rate Multiplier/Divider Multiply by 2, divide by 2
  • External Mode Flashing Range 0.0 to 35,000 FPM (flashes per minute)
  • Accuracy ±0.01 % ±1 digit
  • Phase Shift 0 to 359° with 1° resolution
  • Display Time 0 to 2,000 μsec from 40 – 10,000 FPM
  • External Trigger Input Signal LO level : 0 -0.8 VDC, HI level : 2.5 – 12 VDC or open collector (NPN), pulse width 50 μsec min.
  • Input Impedance 4.7 KΩ to 12 V / 6.8 KΩ to 0 V
  help desk software