Starrett 3753A Electronic Depth Gage


The Starrett 3753 Electronic Height Gage is light and easy to use for depth measurements within its range


IS0-17025 Certification of Calibration

Starrett 3753A Electronic Depth Gage Features:

  • Clear, easily-read numbers, properly sized for the tool
  • Linear accuracy: .001″ (0.03mm) Resolution: .0005″ (0.01mm)
  • Exclusive Starrett designed microprocessor chip
  • Hardened stainless steel body and slide for long life
  • Fine adjustment thumb roll for precision measurements
  • Lock to hold the slide in position
  • Hardened base is 3-15/16″ (99mm) long
  • optional base extensions of 7″ and 12″ (175 and 300mm) are available
  • Spacing between holes is 2-3/4″ (70mm)
  • Hook attachment, to take readings from the edge of a work piece to edges of slots, grooves, shoulders, and other I.D. length dimensioning
  • The removable hook has the screw permanently attached to prevent loss
  • One-year minimum battery life with furnished 3-volt battery, CR2032
  • Inch/millimeter conversion
  • Zero at any position
  • Hold readout at any position
  • Manual ON/OFF plus a built in automatic OFF after 15 minutes of nonuse
    LIMITS button allows high and low limits to be set
  • Out-of-Limits readings will show a flashing display

Available Options

range Product Number
6" 3753A-6/150
8" 3753A-8/200
12" 3753A-12/300

Starrett 3753A Electronic Depth Gage:

Starrett 3753A Electronic Depth Gage

Download the Starrett 3753A Electronic Depth Gage product literature by using the link below:

Starrett 3753A Electronic Depth Gage

  help desk software