Spline Measurement with VICIVISION Confocal

Check splined shafts in a few seconds with the new confocal system

Fast spine inspection on the shop floor. No need to remove the component and take it to the metrology room for a complex and slow inspection.
With the VICIVISION optical measurement and confocal combination, any operator can measure external profile, static and dynamic measurements, as well as splines.

Techno Series

M304 TECHNO Measuring field Ø40 mm X Part capacity300 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø40 mm × 300 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement.

M306 TECHNO Measuring field Ø60 mm X Part capacity300 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø60 mm × 300 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement .

M309 TECHNO Measuring field Ø90 mm X Part capacity300 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø90 mm × 300 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M314 TECHNO Measuring field Ø140 mm X Part capacity300 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø140 mm × 300 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M318 TECHNO Measuring field Ø180 mm X Part capacity300 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø180 mm × 300 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M604 TECHNO Measuring field Ø 40 mm X Part capacity 600 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø40 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M606 TECHNO Measuring field Ø 60 mm X Part capacity 600 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø60 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts.

M609 TECHNO Measuring field Ø 90 mm X Part capacity 600 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø90 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M614 TECHNO Measuring field Ø 140 mm X Part capacity 600 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø140 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shaft measurement

M618 TECHNO Measuring field Ø 180 mm X Part capacity 600 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø140 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shaft .measurement

M1209 TECHNO Measuring field Ø 90 mm X Part capacity 1250 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø90 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M1214 TECHNO Measuring field Ø 140 mm X Part capacity 1250 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø90 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M1218 TECHNO Measuring field Ø 180 mm X Part capacity 1250 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø90 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M625 TECHNO Measuring field 250 mm in diameter, 600 mm in height and 200 kg in weight.
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø140 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shafts measurement

M2018 TECHNO Measuring field Ø 200 mm X Part capacity 2000 mm
Designed for high-speed, non-contact dimensional inspection of precision turned components up to Ø140 mm × 600 mm. Optional touch-probe and confocal sensors support complex features such as keyways, undercuts and splined shaft measurement

OPTICAL MEASUREMENT / 01

Measure without touching the part.

VICIVISION uses telecentric optics, controlled illumination, and advanced software to measure complex components quickly and accurately without physical contact.

THE BASIC PRINCIPLE / 02 Light. Optics. Data.

A simple process. Extraordinary results. VICIVISION systems use a combination of controlled illumination, telecentric optics, and advanced software to turn an image into precise dimensional data

TELECENTRIC OPTICS / 03

See the part. Not the distortion.

Telecentric optics use a parallel viewing geometry, eliminating perspective distortion and maintaining dimensional accuracy across the entire measurement field

FROM SILHOUETTE TO MEASUREMENT / 04

One image.Dozens of dimensions.

The illuminated profile allows VICIVISION systems to analyze external geometry and visible features such as grooves, shoulders, tapers, and through-holes—capturing dozens of measurements in seconds.