Advantages
• Comprehensive contour measurement functions – fast and simple
• Quick adjustment of the Z-axis with handles that are simple to operate
• Replacement of the stylus tip without any tools
• Travel speed in the X-axis of up to 200 mm/s
• Simple program creation or single measurement using MarWin
• Automatic evaluation, best adjustment of contours, CAD contour comparison, and a lot more
• Flexible support plate with 50 mm bore grid for KMG workpiece holder, amongst others
• Optionally expandable with roughness measurements (Rz >2 μm)
• Measurement with double stylus
Mahr MarSurf CD 140 AG 11 contour measuring
$24,950.00 – $28,950.00
NEW Mahr low cost contour unit. contact 866-945-5742 or email: [email protected]
MarSurf CD 140 AG 11. Its probe system has a measuring range of up to 70 mm
and the stylus tips can be replaced quickly and without any tools – without having
to recalibrate the system. The new contour measuring machine MarSurf CD 140 AG 11 enables the user to complete fast and precise measurements. Its flexible workpiece holder makes it particularly easy to handle, while users are also impressed by its extreme versatility – it can also be used to measure roughness. The intelligent probe system and magnetic stylus tip holder ensure the most straightforward process to date for replacing stylus tips without any tools Operators can also choose from a comprehensive range of clamps and workpiece holders. The new MarSurf CD 140 AG 11 can be used in a static position or directly at the location of the workpiece
2150198 MarSurf CD 140 AG 11 70 μm With probe arm length350 mm Measuring force 4 mN to 30 mN, adjustable via software, measuring speed 0.1 mm/s to 10 mm/s, positioning speed
X: 0.1 mm/s to 200 mm/s. Does Not include commissioning or travel expenses
2192104 MarSurf CD 140 AG 11 (including option Roughness) 70 μm With probe arm length 350 mm Measuring force 4 mN to 30 mN, adjustable via software,
measuring speed 0.1 mm/s to 10 mm/s, positioning speed X: 0.1 mm/s to 200 mm/s. Does Not include commissioning or travel expenses
Read More
Fast and precise measurements
• Easy to operate
• Use in a static position or directly at the location of the workpiece
• Manual fine adjustment of the drive unit in the Z-axis
• Stylus tip holder can be used without any tools
• A 390 mm x 450 mm support plate with 50 mm matrix of holes
• High-speed measuring X-axis (140 mm)
• Carrying handles for simple transport
• Quick adjustment of the Z-axis
• Unique adjustment lock secures the adjusted measuring setup
• 350 mm traverse path
• Fast change of stylus tips without tools and without having to recalibrate
Probe system
• Automatic measuring force selection of the correct tracing force when switching between several stylus tips
• Large measuring range – 70 mm
• Probe arm length – 350 mm
• Automated calibration routine for probe arms
• Simple calibration of standard and double probe arms possible
• Simple and repeatable calibration pattern positioning using 50 mm grid
• Magnetic probe arm holder enables probe arm change without tools
• Defined start position
• Aligned axis saving time during preparations
Software
• Simple and intuitive contour measurement and evaluation.
• The measuring assistant will guide you specifically to your measuring data.
• Many measuring tasks – for example for calculating radii, arc lengths, distances, angles etc. – are already pre-programmed for you.
• One particular highlight is the patented “tangential elements” function. This helps evaluate the tangential transitions between radii and straight lines easily and
independently of the user.
