VICIVISION X Series To measure the smallest details
VICIVISION MTL X5 L100 x Dia 16mm , MTL X10 L100 x Dia 8mm and MTL X360 L300 x Dia 60 mm are optical measuring devices specifically designed to measure micro-mechanical parts, dental implants, watch parts and micro-parts in general.
MTL X10 measurement part Length 100 x Diameter 8mm
MTL X5 measurement part Length 100 x Diameter 16mm (ideal for small parts and dental implants)
MTL X360 measurement part Length 300 x Diameter 60mm
These high resolution machines detect even the smallest details. Measuring instruments designed for every need:
- Coaxiality,
- Cylindricity,
- Axial and radial run-out,
- Roundness,
- Thread measurements,
- Nut measurements…
X5 Flow is the patented automatic machine designed to revolutionize in-line dimensional and quality control in the dental and medical fields.
100% inspection of dental implant screws and cylindrical components with diameters up to 3 mm and lengths up to 12 mm.
Read More
Dimensional measurement
- Lengths, diameters, radii, angles
- Thread measurement
- Thread dimensions and form
- Form measurement
- Straightness, roundness, cylindricity, conicity, flatness
- Profile and freeform measurement
- Cam profiles, tolerance ranges, complex contours
- Position measurement
- Radial/axial runout, symmetry, parallelism, concentricity, coaxiality
Time savings
In real production environments, this typically means:
- 5–15 minutes saved per part for complex shafts
- Hundreds of operator hours saved per year in medium‑volume production
- Near‑elimination of operator‑dependent variation, reducing rework and scrap
Manufacturers explicitly highlight that optical shaft scanners:
- “Minimize operator routes” and “reduce sources of error”
- Provide “complete measurements in seconds” with “very little training required”
VICI Overview of Models Flyer 2025
X5 Flow The new standard in quality control for the dental sector 100% inspection of dental implant
screws and turned components with diameter up to 3 mm and length up to 12 mm
MTL X5 MTL X10 FLYER_SERIE-X_ENG
A clear-cut solution for dental implantology and biomedical technology.
- The high resolution, one of a kind in its category, detects even the smallest details
- Its direct access design facilitates loading and unloading of the most difficult to manage pieces.
- No openings or undercuts means that small parts can be easily retrieved if they fall during operation
The measurement machine that reduces costs.
Using an optical measuring device VICIVISION takes this to a whole other level: accurate and instant results and digital data collection.
It is also possible to make a comparison between a theoretical DXF profile and a real profile.
Everything can be carried out on the shop floor by the CNC operator, in just a few seconds.
All the measurement results are automatically collected in an instant report and are available in digital format.
The time saved translates into a significant cost reduction during quality inspection processes, increasing the competitive edge of your company.
