Fowler TRIMOS TELS
53-190-012-0 Mini-Horizontal with internal support plates, standard internal & external probes.
Internal measurements: .24″—4″ (6—100mm) depending on accessories used.
External measurements: 0—4″ (0—100mm). The effective measurement allows a range of 1″ (25mm) which corresponds to the range of Sylvac probe No. 54-618-500.
External measuring range is increased by displacing the end stock (direct zero setting or setting of a preselected value).
Internal measuring range is increased by displacing the measuring inserts (setting of a preselected value according to a ring gage).
Accuracy: Within .00006″ (1.5μ) — corresponds to accuracy of Sylvac probe No. 54-618-500. Used with Sylvac 1″ probe and readout. A accurate to
0.00006″
Resolution: Using Display Unit D50S No. 54-618-148, the resolution is .0001″ or .00001″ (.001 or .0001mm).
Read More
The Fowler/Trimos Mini-Horizontal is a complete system for accurately measuring small internal and external sizes with a single gage.
Sylvac's electronic measuring system is recommended for use with the Mini-Horizontal because of its proven operational reliability. The display unit is the positive answer to a variety of measuring problems. In order to satisfy the demand of quality in production, a direct two-way RS232C data output allows connection to a printer or computer.
Mini-Horizontal Construction
• Monoblock construction with probe guide track.
• Adjustable end-stop with anvil location.
• Control knob for the displacement of the guide track of the monoblock (probe release).
• Adjustable measuring pressure device.
• Location for different measuring features, i.e. electronic probes or indicators, 8mm diameter.
• Interchangeable measuring anvils for external measurements (53-190-019 anvils—6.5mm
diameter with tungsten carbide tipped measuring surface are supplied as standard).
• Interchangeable measuring inserts for internal measurements (53-190-020 Inserts—4.5mm
diameter, rounded, are supplied as standard).
• Vertically adjustable table for internal measurement, hard chromed and ground surface,
supplied as standard.
Accessories:
53-190-020-0 Std. replacement internal probe set. (2 pc.) Included w/unit.
53-190-029-0 Internal ball probe set. (2 pc.)
53-190-030-0 Internal groove probe set. (2 pc.)
53-190-031-0 Internal ball /flat probe set. (2 pc.)
53-190-036-0 Large ball probe. (2 pc.)
53-190-019-0 .256″ std. replacement external probe set. (2 pc.) Included w/unit.
53-190-033-0 .315″ large diameter external probe set. (2 pc.)
53-190-034-0 #4-48 thread external contact point holder (each)
53-190-032-0 M2.5 x .45 thread ext. contact point holder (each)
53-190-037-0 .080″ flat carbide probe (each)
53-190-025-0 Adjustable H support with clearance
53-190-026-0 Adjustable support with crossed V-grooves
53-190-027-0 Adjustable support plate, plane
53-190-028-0 Locking adjustable base w/vertical adjustment for above supports
54-197-106-0 Floating measuring table
Bushings/Extensions:
53-190-017-0 Bushing for AGD indicators to Mini-horizontal – with 3/8″ bushing
53-190-018-0 Rack/extension for AGD indicators to 53-190-012 – with 4-48 threaD
catalogue_en_digital_display_d62s
