54-100-124-0 range 0 – 24″/600mmaccuracy 0.0020″/0.05mm jaw depth 5.4″/138mm
54-100-140-0 range 0 – 40″/600mm accuracy 0.0025″/0.06mm jaw depth 5.4″/138mm
54-100-160-0 range 0 – 60″/1500mm accuracy 0.0055″/0.13mm jaw depth 5.9″/150mm
IP65 – Also features constant measuring force mechanism
Mahr Federal MarCal 16 EWR-BA and 16 EWR-VS has immediate measurement due to Reference System. Excellent resistance against dust, coolants and lubricants, Protection Class IP67
16 EWRi-BA adjustable hole center ,16 EWRi-VS adjustable jaw – IP67 Wireless models
Flexbar Calibration Master for in-house calibration of Vernier, Dial and Digital Calipers and Height Gages.
Includes Certificate of Calibration Traceable to N.I.S.T.
Mitutoyo Low Force Caliper-Due to the low measuring force these calipers are ideal for elastic or resilient workpieces such as plastic parts and rubber parts that standard calipers can’t measure consistently.
With SPC data output. Measuring force: 0.49N to 0.98N (50gf to 100gf)
Starrett EC799A Electronic Calipers
The EC799 Electronic Caliper is light, comfortable, easy-to-use, and constructed
with features that have made Starrett slide calipers the machinist’s first choice
for many years. Output now available on B models.
The EC799 offers a slim, streamlined profile, a large, clear, easy-to-read LCD
display, long battery life, and function buttons for zero and inch/mm
The Mitutoyo 515-565 Caliper Checker is a calibration standard for checking the measurement accuracy from 1″ to 12″ of vernier, dial, and digital calipers as well height gauges; and features wear-resistant ceramic reference gauge and base blocks. The reference gauge blocks and base block are made of high-hardness zirconia (ZrO2) ceramic to resist abrasion for maintaining calibration accuracy. The reference gauge blocks are spaced to check the accuracy of inside, outside, and height measurements at 1″, 2″, 4″, 6″, 8″, 10″, and 12″. The block pitch accuracy is + or – 0.0002″ and block surfaces have parallelism of 0.00008″. The caliper checker comes with a vinyl cover, inspection certificate, and instructions. A calibration standard is a reference tool for determining the measurement accuracy of an instrument.
Eliminate your trips to the crib for batteries with Mitutoyo’s Solar powered coolant proof calipers
Mitutoyo Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws
The Starrett Master Vernier Calipers have half as many bar graduations as conventional single-vernier tools, making it very east to read. The calipers are tight, smoothly fitted slides, with no glare from the Starrett satin chrome finish.
The next generation of Mitutoyo electronic calipers
Starrett 823 Tubular Inside Micrometer Features: Ideal for internal measurements of cylinders, rings, setting calipers, comparing gages and measuring parallel surfaces Rods are rigid and lightweight 5-1/2″ (140mm) long handle furnished Each rod is marked with length Hardened and ground anvils Accuracy- Mic Head: ±.0001″ Rods: ±.0002″ Graduations: .001″
Calipers -DATAPAK With the Bluetooth® transmitter provided along with the TESA calipers, data acquisition has never been easier!
With the free download data acquisition software DATA-VIEWER, you can automatically fill in your
measurement reports. TESA instrument drivers included. Software configuration required: Windows 7 /
8.1 / 10 processor, 32 & 64 bits. Minimum hardware configuration required: Intel i5
or equivalent, 4 GB of RAM, 100 MB of hard drive.
Mahr Wireless data transmission capability is integrated within MarCal digital calipers using proven wireless technology. These calipers are easy-to-read, with a large clear digital display, and include a number of
advanced features such as lapped guideways , a reference system that retains the zero position setting and a number of product options and accessories.* Starter set includes an i-Stick wireless receiver
Mitutoyo Inside Caliper Knife-Edge/Inside Groove/Point Jaw calipers
Simplify your data acquisition system. This SmartCable Keyboard USB, single gage interface connects standard Mitutoyo gages (indicators, micrometers, calipers, etc.) and other gages that mimic the Mitutoyo Digimatic signal, to a computer – gage cable not included
