
Diatest 2-point measuring instruments for internal gear gauging
Diatest Flexible indicating 2-point measuring instruments for internal gear gauging Measurement of internal and external gear gauges, taper and ovality.... Read More
Diatest AMG External Diameter Gage ideal for Gears and Splines
Diatest AMG External Diameter Gage call 866-945-5742 or email: [email protected] for more info Read More
Diatest DIA-COME for gear gauging
Diatest DIA-COME for gear gauging Internal Gear Gauges Mi = 70 – 275 mm External Gear Gauges ma = 0... Read More
Diatest External Gear Gauges EG
Diatest External Gear Gauges: Range over balls Ma = 0 – 140 mm Available in four measuring ranges: Ma =... Read More
Diatest External Spline Measurement over Balls
Diatest External Gear Gauges EG Series are devised to measures the external diameter of precision gears, splines, tapered holes and... Read More
Fowler Special Bore Measurement – Internal Spline – External Spline
Fowler Special Bore Measurement - Internal Spline 2 and 3 point heads available. Anvils manufactured from tool steel. Between pin,... Read More
Gage to Check Grooves and Splines on Machine (Production floor or Inspection)
Special Groove Gage for checking large diameter parts while on the machine or in the inspection room. Ideal for spline... Read More
Gear and Spline Teeth Measurement Non Contact Laser System
This is a fully customizable system to suit your needs for gear and spline inspection and measurement. The system can... Read More
Gear Measuring Wires
Gear measuring wires are a quick & economical method to measure the tooth thickness of gears at the pitch diameter.... Read More
Internal Pitch Diameter Bore Gage
The Internal Pitch Diameter gage is ideally suited to check the internal pitch diameter of gears and splines. It can... Read More
Mahr Gear gage for Dimension over Balls
Mahr Gear gage for Dimension over Balls. KMR Gear Measurement System Call 866-945-5742 or email: [email protected] for more information Read More
Mahr MarGear GMX 400 W Universal Gear Measuring Center
Mahr MarGear GMX 400 W Universal Gear Measuring Center Diameter Max.* 400 mm / 16 in Applications: • Basic measuring... Read More
Mahr MarGear GMX 400 ZLW Universal Gear Measuring Center
Mahr MarGear GMX 400 ZLW Universal Gear Measuring Center Gear Diameter Max.* 400 mm / 16 in Applications: • Basic... Read More
Master Gears
Willrich Precision offers Master Gears. Helical Gear Masters that conform to ISO, DIN, BS, AGMA, and JIS standards. Gear artifacts... Read More
Phase II PHT-1740 Portable Hardness Tester for Gears
This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1740 is an economically... Read More
Phase II PHT-1840 Gear Teeth Portable Hardness Tester
This dedicated unit is designed to test gear teeth and other difficult to access applications. The 1840 is loaded with... Read More
Spline Gages
Willrich Precision offers spline gages Spline gages are designed according to the tolerances 'actual' and 'effective'. From design to final... Read More
Spline Pitch Diameter Gages
Comtorgage Internal Spline Pitch Diameter Measurement Made Easy! This gage incorporates two AGD gage pins of the size specified on... Read More
Spline Plug and Spline Ring Gages
Go and No Go spline gauges that confirm to ISO, DIN, AGMA, and JIS standards. Spline gauges can be manufactured from... Read More
Vari-Roll Composite Gear Testers
Vari-Roll Composite Gear Testers Ultra Precision Composite Gear Checking Equipment VARI-ROLL Composite Gear Testers provide an eefficient means of conrming dimensional accuracy... Read More
Vari-Roll Gear Software
The New VARI-PC Radial Dual Flank Composite Analyzer System has been built from the ground up to provide the best of... Read More
Vari-Roll Vertical Centers Attachment
Precise and convenient testing of pinions up to 6/152mm diameter location on interchangeable male or female centers will be achieved by... Read More
Marposs M62X for checking Major Diameter and Minor Diameter on External Gears
Marposs Manual use bench gauge with multiple contact turrets suitable for the inspection of DOB (MdK), Major Diameter and Minor... Read More
Marposs M62X for checking Major Diameter and Minor Diameter on External Gears
Marposs Manual use bench gauge with multiple contact turrets suitable for the inspection of DOB (MdK), Major Diameter and Minor... Read More
CONSIDER A CMM FOR GEAR INSPECTION
CMMs offer a capable, affordable and flexible gear inspection option. Gear inspection has long been considered a highly specialized, expensive and difficult part of the gear..
Read More