Metrology Education

BORE GAGES AND INTERNAL DIAMETER GAGES:

Air Gaging Basics
Air Gaging Basics
Air Flow Gaging
Air Flow Gaging
Challenges of Internal Measurement
Challenges of Internal Measurement
Video: Measuring Ovality with 2 Point Bore Gage
Video: Measuring Ovality with 2 Point Bore Gage
Video: Measuring Tri-Lobing using 3 Point Bore Gage

CALIBRATION:

Calibrating Thread Gages
How to Calibrate a Caliper
How to Calibrate a Caliper
Video: Metrology Training Lab (What is Calibration?)
Video: Metrology Training Lab (What is Calibration?)
Video: What is Calibration
Surface Plates – Accuracy and Calibration

COORDINATE MEASURING MACHINES:

Justify CMM Tech Paper

Dial Caliper & Digital Caliper

How to read a dial Caliper
How to read a dial Caliper
Digital Caliper Use
Digital Caliper Use

FIXED LIMIT GAGES- PLAIN CYLINDRICAL GAGES:

Understanding Fixed Limit Gauging – Go and Nogo Gauges
Understanding Fixed Limit Gauging – Go and Nogo Gauges
How to pick the correct plug gage size
How to pick the correct plug gage size

FLATNESS AND PARALLEL MEASUREMENT:

Flatness Measurement and Parallel Measurement

FORCE GAGE TESTING AND MATERIAL TESTING

Force and Torque Conversions (Units of measure)
Force and Torque Conversions (Units of measure)
Material Testing
Material Testing

GD&T and MEASUREMENT:

Concentricity Measurement
Gagemakers Tolerance Chart
Gagemakers Tolerance Chart
GR&R – Gage Reproducibility & Repeatability
GR&R – Gage Reproducibility & Repeatability
Understanding Millionths of an Inch
SWIPE
SWIPE
Geometric Symbols and Definitions
Geometric Symbols and Definitions
Precision, Accuracy, Uncertainty, and Traceability
Precision, Accuracy, Uncertainty, and Traceability

GRANITE SURFACE PLATES THE FOUNDATION OF METROLOGY

Granite Surface Plate Video
Granite Surface Plate Video

HARDNESS TESTING:

Hardness Testing-power point
Hardness Testing-power point
Rockwell Hardness Testing Symbols and Definitions
Rockwell Hardness Testing Symbols and Definitions
Rockwell Hardness Testing
Rockwell Hardness Testing
Best Practices for Rockwell Hardness Testing
Best Practices for Rockwell Hardness Testing
Rockwell Hardness Measurement Educational
Rockwell Hardness Measurement Educational

HEXALOBE GAGES:

Hexalobular ISO-10664 Specification
Hexalobular ISO-10664 Specification
Standard Six Lobe Recess
Standard Six Lobe Recess
ISO 10664.2014 Standard Plugs
ISO 10664.2014 Standard Plugs

MICROSCOPES:

History of Microscopes
History of Microscopes

MICROSCOPES:

Micrometer: How to use a Micrometer
Micrometer: How to use a Micrometer

SPC – Statistical Process Software

Mitutoyo Measurelink
Mitutoyo Measurelink

SURFACE ROUGHNESS MEASUREMENT:

QuickGuide_Surface-Roughness-Testers
QuickGuide_Surface-Roughness-Testers
Surface Roughness Paramaters
Surface Roughness Paramaters
Surface Roughness Testers Skidded vs Skidless
Surface Roughness Testers Skidded vs Skidless
Mitutoyo Surface Roughness units Skidded vs Skidless
Mitutoyo Surface Roughness units Skidded vs Skidless
Surface Roughness Testers Skidded vs Skidless Diagram
Surface Roughness Testers Skidded vs Skidless Diagram

THICKNESS GAGE, HOW TO USE

Thickness Gage: How to use a Thickness Gage
Thickness Gage: How to use a Thickness Gage

THREAD GAGES:

Thread Gages Educational
Thread Gages Educational
Thread gages technical plugs and rings
Thread gages technical plugs and rings
Wear Check Hi Lo Thread Plugs
Wear Check Hi Lo Thread Plugs
Thread Gage Pitch Diameter Chart
Thread Gage Pitch Diameter Chart
Thread Gage Design and Thread Gages Designations
Thread Gage Design and Thread Gages Designations
Tapered Pipe Thread Gages
Tapered Pipe Thread Gages
British Thread Gage information
British Thread Gage information
ACME Thread Gages vs Stub Acme Thread Gages
ACME Thread Gages vs Stub Acme Thread Gages
API Thread Gages
API Thread Gages
ANSI/ASME B1.5 Acme standard
ANSI/ASME B1.5 Acme standard
How to use Pipe Ring and Plug Gages 3 Step and 6 Step
How to use Pipe Ring and Plug Gages 3 Step and 6 Step
Adjustable Thread Rings and Setting plugs
Adjustable Thread Rings and Setting plugs